Monorail Crane: 5 Ton Single Girder Overhead Travelling Crane for Sale

Monorail overhead crane machine, also called single girder overhead crane. With a monorail system, the hoist and trolley run on a single stationary beam. Our engineers can design and build supporting structures, top running single girder crane and underslung overhead crane to meet your application requirement.

5 ton single girder monorail overhead crane for sale to Philippines, is used for new plant expansion. According to our customer’s detailed requirement, our 5 ton monorail overhead crane is designed to travel on top of a runway system that can be either supported by existing building columns.

5 ton monorail overhead crane design drawing

Monorail Overhead Crane Design Features:
Crane Girder:

Girders are designed to resist all vertical, horizontal and torsional forces.
Bridge girders are hot rolled structural steel shapes or welded box girders designed to meet the requirements.
End Trucks:

End trucks shall be constructed of structural steel tubes, providing a rigid structure.
Design shall allow easy wheel removal and exchange.
End trucks can be fitted with shock absorbing bumpers.
Crane wheels are high strength ductile iron, machined with double flanges and straight treads, flame hardened.
Wheels are sized to meet the minimum allowable wheel loads.
The wheel axle assembly can rotate on dual high quality anti-friction, lifetime lubricated bearings having a minimum life of 5,000 hours.
The end truck to girder connection is bolted for easy removal of end truck.
Wire Rope Hoist:

The wire rope hoist comprise of rope drum made from seamless tube. Grooves are machined on rope drum for proper support to the wire rope.
Cast Iron rope band and guide prevents wire rope jumping from grooves.
The hoisting drive arrangement comprises of motor coupled to an oil lubricated, spur / helical gearbox that in turn provides the motion to the rope drum.
An electromagnetic fail safe brake prevents accidental lowering of load in the event of power failure.
Limit switch is provided to prevent over hoisting of hook block. Additional limit switch can also be provided to prevent over lowering of hook block.
5 ton monorail overhead crane for philippines

Electrification and Controls:
To supply the electrical power across the crane for bridge, trolley and
hoist motions, a flat cable festoon system shall be utilized.
The trolleys that carry the flat cable shall have steel wheels with sealed ball bearings.
Flat cable connectors can be heat shrinkable, corrosion resistant and flame retardant.
A magnetic mainline contactor, controlled by momentary on/off switches on the pushbutton shall be included.
Hoist functions are controlled by magnetic contactor.
Bridge and trolley functions are controlled by separate variable frequency drives.
All controls are sized to meet ambient temperatures.
A cooling system will be provided for each enclosure when the ambient temperature exceeds the maximum allowable operating temperature of the individual Electrical components.
Standard Overhead Crane Includes:
Wire rope hoist.
Trolley end stops.
end carriages.
Detailed engineering for bridge construction and crane assembly, including two sets of the maintenance manual.
Complete trolley and sliding push button festoon system with all required mounting hardware.
Bridge conductor cables pre-wired to quick disconnect plugs.
Bridge control panel.
Special kits available upon request.
Monorail Crane: 5 Ton Single Girder Overhead Travelling Crane for Sale