Topic: Overhead gantry crane: How to select overhead gantry crane
Overhead gantry crane selection tips. There are many types of overhead gantry cranes, such as full overhead gantry crane, semi-gantry overhead crane, truss overhead gantry crane, etc. How to select the overhead gantry crane manufacturer? Check now.
How to select overhead gantry crane?
Overhead cranes are immensely popular for heavy weight lifting and the lower cost overhead gantry cranes are hugely acknowledged. These are considered a substantial alternative to the overhead cranes. These types of cranes are similar to the overhead crane only with a difference that it runs on a track on the floor or ground level not on an elevated runway. The bridge of gantry is sustained by a pair of tough steel legs which are carried by a pair of end trucks along the floor runway. Such cranes are accessible as both indoors and outdoors in spans to 150 feet and capacities to 10 tons.
Overhead gantry crane video
As overhead gantry cranes are made to ride on the ground, there is no need of runway structure and thus saving on the concrete foundations. The installation procedure for the overhead gantry crane is very simple and swift. On the basis of the environment and application, these cranes can sometimes offer the same material handling potential as a comparable overhead crane system, but with a noteworthy cost savings.
But, in contrast not all gantries will cost less than their counterparts, i.e. overhead cranes. But there are circumstances where these overhead gantry cranes can prove more reasonable and efficient:
When the investor is in no mood of putting a major amount in a overhead crane runway structure.
When there is requirement for the material handling equipment for the interior and exterior of your building.
When there is chance of shifting the workplace and the owner does not want to afford much loss.
Overhead gantry cranes are easily assembled and disassembled, whether mounted or mobile. Gantries are profitably utilized across manifold industries. These Cranes are obtainable in steel, aluminum or a lightweight model along with adaptable heights and spans. Further variations of cranes include: container, overhead, a frame, rubber tire, rolling, semi and rail mounted overhead gantry cranes.
Such type gantries are classified into two categories: manual and motor driven.
Portable gantry (manual)
Adjustable gantry (manual)
Motor driven gantry
Each type has its own benefits which could be easily compared to the benefits offered by the overhead cranes. When we talk about manual gantries as part of your material handling equipment solutions we say that they are lightweight, high expensive with easy of assembling and disassembling. They are said to be more productive and endowed with superlative safety. And in case of motor driven cranes we can eliminate the need of runways and are easily transportable.
Thus we can say that investing in the gantries is not at all a bad deal and thus if the owner does not have much to spend on material handling equipment then these are the best buy for him. Overhead gantry cranes possess all the capabilities and efficiency as enjoyed by the overhead cranes. But before buying gantry one must review his needs and utilization because if in order to see money he invested in gantries and later realizes that his requirement for much bigger cranes like, jib crane then his entire work will be in waste.
Overhead gantry cranes, like any other types of equipment need regular maintenance. This is in order to assure their continued usefulness. In order to maintain a overhead gantry crane, you need to fully understand its workings. You need to know how all parts of the overhead gantry crane fit together. This means that you need to find some overhead gantry crane blueprints. Now that you know about your need for overhead gantry crane blueprints, all that remains is for you to realize where to get them.