Topic: How To Fix Canon Printer Error 6c10?
The group printers contain an inner counter that monitors the quantity of pages that have been printed and how frequently a tidy up has been done, etc. These counters are utilized to decide the measure of waste ink that may be assembled at the foundation of the printer. At the point when the group printer accepts that the waste ink tank is full, the printer not printing and gives you a mistake message "Fix Printer error code 6c10".
Fix blunder 6c10 with no issue
The Canon printers have a proclivity to decide the level of the waste tank wrongly. In this way, you can ordinarily print more, just by resetting the inside counter. In this bit by bit article on the most proficient method to fix group printer mistake 6c10, you will learn only that.
First and foremost, we will attempt to clean the froth that gathers the waste ink. This should ideally clear the mistake.
Stage 1: Undo the top of the printer and permit the cartridge transporter inside the printer to focus itself. At the point when the cartridge transporter is focused, you will see a column of white rollers behind the transporter on the right side.
Stage 2: Clean the plastic. Toward the finish of the rollers, you will find a little plastic piece that is clear and is standing out. Take a little piece of a delicate fabric or a paper towel to clear the ink off of this plastic. Subsequent to cleaning the plastic, ensure that you clean the ink cushion too.
Stage 3: Clean the froth cushion. From the piece of plastic towards the front, you will find a little square item that seems as though a froth cushion. This is the place where the printer gathers the overabundance ink. Utilize a perfect piece of paper towel and press into the froth cushion. Continue to clean this cushion until the paper towel doesn't accumulate any more ink from the cushion.
Stage 4: Restart the printer. Subsequent to cleaning everything, set everything back into its unique position and plug in the printer once more. This should fix your concern. If not, we should restart the ink safeguard counter.
To reset the ink safeguard counter, play out the accompanying advances: –
Stage 1: Switch off the printer.
Stage 2: Press and hold the Resume button.
Stage 3: Next, press and hold the Power button simultaneously. This will make the green LED light up.
Stage 4: Holding the power button, discharge the resume button.
Stage 5: Press the resume button twice and afterward discharge both the buttons together.
Stage 6: Press the resume button multiple times and afterward quickly press the Power button.
The above succession of moves should reset the ink safeguard counter on the printer. After you have played out this progression, turn off the gadget and fitting it once more.
In the event that you have cleaned the froth gatherer just as reset the ink safeguard counter, your inquiry on the best way to fix ordinance printer blunder 6c10 has been effectively replied. If not, you should contact the client assistance group to assist you with fixing your concern.
Also Check :